We fit combi, system and conventional boilers to the Boiler Plus standard, notify Building Control, register the manufacturer warranty and give you a fixed written price before we start.
Adept Heating installs gas, oil and LPG boilers across Bolsover, Chesterfield, Dinnington, Killamarsh, Kiveton Park, Mosborough, North Anston, Rotherham, South Anston and Worksop. Gas Safe registration 648079. Call 07519 665062.
We come out and look at the property properly. We ask what the heating does well and what it does badly, take the measurements the job actually needs, and then put a price in writing covering the boiler, the labour, the system clean, the filter, the controls and the certification.
That price does not move unless you change what you have asked for. If we find something on the day that genuinely changes the job, and occasionally we do because you cannot see behind a boiler until it comes off the wall, we stop, explain what it means and what it costs, and carry on once you are happy.
Combi boiler. Heating and hot water on demand from one unit, with no cylinder or loft tank. Right for most two and three bedroom houses with one bathroom. The limit is flow rate, because a combi heats water as you use it, so two showers running at once will be disappointing.
System boiler. Works with a hot water cylinder, usually unvented. Right for larger houses, anywhere with two or more bathrooms, and any household where several people want hot water at the same time.
Conventional, also called heat only or regular. Cylinder plus a feed tank in the loft. Usually a like for like replacement in an older property, or where the mains water pressure will not support anything else. Still the right answer more often than people expect.
We measure the incoming mains flow rate in litres per minute before quoting a combi, count the bathrooms and outlets, check the radiator sizing and confirm the gas supply pipe can carry the load. The boiler is sized from the heat loss of the property rather than from the size of the old one, because an oversized boiler short cycles and wears out early.
We install quality boilers from Worcester Bosch, Vaillant, Baxi and Ideal, and service and repair all makes.
Worcester Bosch is the premium option and the one we would put in our own house. Vaillant is the option for anyone who wants a properly made boiler without the top end price. Both are well supported, parts are available locally, and both are registered by us at installation.
For servicing and repairs we cover all makes, whoever fitted it.
Since April 2018 every gas boiler installed in a home in England has had to meet the Boiler Plus standard: a minimum ErP efficiency of 92% and at least one additional efficiency measure, such as smart controls, load compensation, weather compensation or flue gas heat recovery.
In practice we fit time and temperature controls plus one of those measures, included in the job rather than added on afterwards.
Qualified engineers, a clean job and a fixed written price agreed before we start. We stand behind everything we fit.
It depends on the boiler, whether it is a straight swap or a conversion, and what the existing system needs doing to it first. A like for like combi swap and a conventional to combi conversion are very different jobs. We come out, look at the property and give you a fixed written price covering the boiler, labour, system flush, filter, controls and certification, so there is nothing to add on later. Ring and we will talk you through what your house is likely to need.
A like for like combi swap is normally one day. A conventional to combi conversion is usually two. Larger system work takes longer and you are told the schedule before booking.
Between 7 and 12 years, depending on the make and model you choose and how the installation is specified. We register it with the manufacturer at installation. Every manufacturer warranty requires an annual service by a registered engineer to stay valid, so put the service in the diary the day the boiler goes in.
Most manufacturers now require one for the warranty and it is sensible regardless. It catches the magnetite sludge circulating in older systems, which is the main cause of premature heat exchanger failure. It is included as standard on every installation we do.
Yes. Moving a boiler to a utility, garage or loft is common and often improves the layout of the house. It adds pipework, flue and condensate runs to the job, so it costs more than a straight swap, and that is priced in before you decide.
Call 07519 665062 for a free quote and a fixed written price, or message us on WhatsApp with a photo of your existing boiler.
