The boiler, radiators, pipework, cylinder and controls, designed around the property rather than supplied as a standard package, and installed to current Building Regulations.
Adept Heating installs complete central heating systems across Bolsover, Chesterfield, Dinnington, Killamarsh, Kiveton Park, Mosborough, North Anston, Rotherham, South Anston and Worksop. Gas Safe registration 648079. Call 07519 665062.
We fit central heating from scratch in properties that have never had it, replace systems that have reached the end of their life, and convert older setups to suit how the house is used now. Gas, oil or LPG.
Radiator sizing should come from a room by room heat loss calculation. That means the size of the room, the construction of the walls, the glazing, the insulation, what sits above and below it, and the temperature you want the room to reach.
Skip that step and you end up with the house that has one room that never warms up and another that is too hot with the valve half shut. We size the radiators to the rooms, size the pipework to the flow, balance the system at commissioning and set the boiler to a flow temperature that lets it actually condense.
Building Regulations Part L requires separate space heating zones in larger properties, and in practice any house over two floors benefits from it. Heating an empty upstairs to 21 degrees all evening because the only thermostat is in the downstairs hall is money going out through the loft.
Zone valves, a second thermostat and modern controls add very little to a full system and reduce the running cost permanently.
Qualified engineers, a clean job and a fixed written price agreed before we start. We stand behind everything we fit.
It comes down to the number of radiators, the boiler you choose and whether there is existing pipework worth working with. A first time installation in a house that has never had heating is a very different job from replacing a tired system. We survey the property, do the heat loss calculation and give you a fixed written price covering the boiler, radiators, pipework, controls and certification.
Yes. First time installations are a large part of what we do, in older stone properties, former colliery housing and rural homes that have been on storage heaters or solid fuel.
No, but somebody needs to give access at the start and end of each day. Most customers carry on around it.
For a first time installation, in most cases yes, at least partially. We lift and refit floorboards carefully and tell you in advance where the runs go. Laminate and engineered floors are discussed before we start, never after.
Yes. Wet underfloor heating can be installed as part of a new heating system, on its own or alongside radiators. We will advise on what suits your property and floor construction before any work starts.
Yes, and it is worth asking. Sizing radiators and pipework for a lower flow temperature now makes a future move to an air source heat pump far simpler and cheaper. We are adding heat pump installation once our training and certification are complete, and we can design the system with that in mind.
Call 07519 665062 for a system designed around your property and a fixed written price.
